END -QUENCH HARDENABILITY TEST FOR GAS QUENCHED STEELS (CROSBI ID 550415)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Landek, Darko ; Liščić, Božidar ; Filetin, Tomislav ; Lübben, Thomas
engleski
END -QUENCH HARDENABILITY TEST FOR GAS QUENCHED STEELS
Hardenability is an inherent property of every steel, usually characterized by the Jominy end-quenched test. For steel grades quenched in liquid quenchants this test is enough selective, and for them a good fixed correlation between cooling time from 800 to 500 oC (t 8/5) and the distance from the quenched end can be established. For steel grades of high hardenability, the Jominy test is not enough selective and sensitive. To establish hardenability for these steels a new hardenability testing method with the modified Jominy test specimen has proposed after initial investigations at Stiftung Institut für Werkstofftechnik at University of Bremen. The proposed method it is based on the high pressure gas end-quenching of cylindrical specimen with variations of kind of gas, pressure and its velocity to achieve more gradual decrease of cooling rates along the specimen and to make the hardenability test more selective with a broader range of lower cooling rates. The heat transfer simulation of cooling curves at different locations in the end-quenched probe gives possibilities for determination of cooling time t8/5 at different distances from the quenched end, for different quenching conditions. In addition, the relation between hardness distribution and the cooling time t8/5 have established for tested end-quenched specimens.
hardenability; gas quenching; modelling; steel 90MnCrV8
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
103-108.
2009.
objavljeno
Podaci o matičnoj publikaciji
New Challenges in Heat Treatment and Surface Engineering - Conference in Honour of Prof. B. Liščić
Smoljan, B ; Matijević, B.
Zagreb: Hrvatsko društvo za toplinsku obradu i inženjerstvo površina
978-953-96459-9-9
Podaci o skupu
New Challenges in Heat Treatment and Surface Engineering - Conference in Honour of prof. B. Liščić
predavanje
09.06.2009-12.06.2009
Cavtat, Hrvatska