MEANS OF INITIATION AND VELOCITY OF DETONATION OF ANFO EXPLOSIVES (CROSBI ID 548553)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Žganec, Stjepan , Ester, Zvonimir ; Dobrilović, Mario ; Stanković, Siniša
engleski
MEANS OF INITIATION AND VELOCITY OF DETONATION OF ANFO EXPLOSIVES
Laboratory testing of detonation properties cannot performed in advance, for the explosives mixed on the field of use. VOD velocity of detonation, measured in blast hole is cheap and simple method that ensure determination of explosive properties, in situ. Tests are performed on explosive charge of ANFO and heavy ANFO explosives initiated with appropriate booster or with small charge of some other explosive that are sensitive to impulse of detonator cap no. 8. Initiations of blast holes charges were conduct in different means. Paper presents results of measurements performed during blasting with three different types of explosives with different velocity of detonation. Measurements purpose was to bring an optimal mean of initiation respecting economy and technical factors.
velocity of detonation measurement ; ANFO ; initiation
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
515-525.
2009.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 12th Seminar on New Trends in Research of Energetic Materials
Jiri Pachman, Jakub Selesovsky, Robert Matyas
Pardubice: Press Center of University of Pardubice
978-80-7395-156-6
Podaci o skupu
12th Seminar on New trends in research of energetic materials
poster
01.04.2009-03.04.2009
Pardubice, Češka Republika