Napredna pretraga

Pregled bibliografske jedinice broj: 394116

Application of Ultrasonic Measurements for Determination of Setting and Hardening in Cement Paste


Gabrijel, Ivan; Mikulić, Dunja; Milovanović, Bojan
Application of Ultrasonic Measurements for Determination of Setting and Hardening in Cement Paste // Construction in the 21st Century CITC-V Collaboration and Integration in Engineering, Management and Technology / Birgonul, M. Talat ; Azhar, Salman ; Ahmed, Syed M. ; Dikmen, Irem ; Budayan, Cenk (ur.).
Istanbul: Florida International University, Miami, Florida, U.S.A. ; Middle East Technical University, Ankara, Turkey, 2009. str. 1420-1426 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Application of Ultrasonic Measurements for Determination of Setting and Hardening in Cement Paste

Autori
Gabrijel, Ivan ; Mikulić, Dunja ; Milovanović, Bojan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Construction in the 21st Century CITC-V Collaboration and Integration in Engineering, Management and Technology / Birgonul, M. Talat ; Azhar, Salman ; Ahmed, Syed M. ; Dikmen, Irem ; Budayan, Cenk - Istanbul : Florida International University, Miami, Florida, U.S.A. ; Middle East Technical University, Ankara, Turkey, 2009, 1420-1426

ISBN
1-884342-02-3

Skup
Fifth International Conference on Construction in the 21st Century, CITC-V

Mjesto i datum
Istanbul, Turska, 20-22.05.2009

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Cement hydration; setting time; ultrasonic measurements; acoustic emission

Sažetak
Concrete setting and hardening processes are the most critical phases during construction works, influencing properties of a concrete structure. The initial set is important as it provides an estimate when concrete has reached a point that it can no longer be vibrated without damaging concrete. The point at which final set occurs is important since it provides an estimate when the development of concrete strength and stiffness starts. In this study, experimental work is performed under laboratory conditions to indentify the setting time of cement paste using ultrasonic waves. Correlation between the ultrasonic wave parameters (speed, amplitude and energy) passing through the fresh cement paste and setting time determined using the Vicat test method is analyzed. A method of acoustic emission is also used and acoustic signals recorded in cement paste during hydration are presented.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo, Temeljne tehničke znanosti



POVEZANOST RADA


Projekt / tema
082-0822161-2990 - OD NANO DO MAKROSTRUKTURE BETONA (Nina Štirmer, )

Ustanove
Građevinski fakultet, Zagreb