Measurement line for static torque (CROSBI ID 545724)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Risović, Stjepan ; Žeželj, Dragan ; Panić, Nenad
engleski
Measurement line for static torque
This work is driven by the idea to create a design solution of semi-automatic measurement line that would provide more accurate results and increase the speed of the recalibrating process of torque tools. Tools considered here are operated by hand, therefore subjected to the performance (skill, strength and knowledge) of the operator. Since the pulling speed and the force are difficult to maintain or repeat results differ from expected values. The analysis filtered out the solution with gearbox and trapezoidal spindle which is taken as the base for prototype line to be produced. Testing has shown enhanced repeatability of the measurement, ease of operation and suitability for implementing automation features and thus fulfilling of initial requests.
torque; tools; measurement
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
1177-1178.
2008.
objavljeno
Podaci o matičnoj publikaciji
Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions"
Katalinić, Branko
Beč: DAAAM International Vienna
978-3-901509-68-1
Podaci o skupu
19th International DAAAM Symposium: Intelligent Manufacturing & Automation: "Focus on Next Generation of Intelligent Systems and Solutions"
poster
22.10.2008-25.10.2008
Trnava, Slovačka