Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 382023

Expansion of traceability chain of PEL to high value resistance standards


Leniček, Ivan; Ilić, Damir; Šala, Alan
Expansion of traceability chain of PEL to high value resistance standards // Proceedings of the 16th IMEKO TC4 International Symposium / Catelani, Marcantonio (ur.).
Florence: IMEKO, A&T, 2008. str. 165-169 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 382023 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Expansion of traceability chain of PEL to high value resistance standards

Autori
Leniček, Ivan ; Ilić, Damir ; Šala, Alan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 16th IMEKO TC4 International Symposium / Catelani, Marcantonio - Florence : IMEKO, A&T, 2008, 165-169

ISBN
978-88-903149-3-3

Skup
16th IMEKO TC4 International Symposium

Mjesto i datum
Firenca, Italija, 22-24.09.2008

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
resistance standards; traceability; modified Wheatstone bridge

Sažetak
In the Primary Electromagnetic Laboratory (PEL), which is a part of the Faculty of Electrical Engineering and Computing of the University of Zagreb and a part of the Croatian metrology system, the unit of resistance (ohm) is maintained by the group of reference and working standards of nominal decade values ranging from 1 mΩ to 100 GΩ . The group of high value resistance standards from 100 MΩ to 100 GΩ is the hindmost incorporated in the resistance traceability chain, and relies on laboratory developed measurement system for high resistance comparison, which is presented in this paper. Realization of traceability of high value resistance standard group toward both of 10 kΩ and 10 MΩ reference standards is described. Based on 10 MΩ as starting point, the high resistance scaling was performed and temperature coefficients of resistors were determined. The obtained results of high value resistance comparison were analyzed and compared with the calibration values obtained at Physikalisch-Technische Bundesanstalt (PTB).

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika



POVEZANOST RADA


Projekti:
036-0363081-1650 - Mjerenje elektromagnetskih veličina na etalonskoj razini (Ilić, Damir, MZOS ) ( POIROT)

Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb

Profili:

Avatar Url Damir Ilić (autor)

Avatar Url Alan Šala (autor)

Avatar Url Ivan Leniček (autor)


Citiraj ovu publikaciju:

Leniček, Ivan; Ilić, Damir; Šala, Alan
Expansion of traceability chain of PEL to high value resistance standards // Proceedings of the 16th IMEKO TC4 International Symposium / Catelani, Marcantonio (ur.).
Florence: IMEKO, A&T, 2008. str. 165-169 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Leniček, I., Ilić, D. & Šala, A. (2008) Expansion of traceability chain of PEL to high value resistance standards. U: Catelani, M. (ur.)Proceedings of the 16th IMEKO TC4 International Symposium.
@article{article, editor = {Catelani, M.}, year = {2008}, pages = {165-169}, keywords = {resistance standards, traceability, modified Wheatstone bridge}, isbn = {978-88-903149-3-3}, title = {Expansion of traceability chain of PEL to high value resistance standards}, keyword = {resistance standards, traceability, modified Wheatstone bridge}, publisher = {IMEKO, A and T}, publisherplace = {Firenca, Italija} }
@article{article, editor = {Catelani, M.}, year = {2008}, pages = {165-169}, keywords = {resistance standards, traceability, modified Wheatstone bridge}, isbn = {978-88-903149-3-3}, title = {Expansion of traceability chain of PEL to high value resistance standards}, keyword = {resistance standards, traceability, modified Wheatstone bridge}, publisher = {IMEKO, A and T}, publisherplace = {Firenca, Italija} }




Contrast
Increase Font
Decrease Font
Dyslexic Font