Napredna pretraga

Pregled bibliografske jedinice broj: 374723

Automated measurement with electrooptical distance meter and precise distance measurement processing at the calibration base of the faculty of geodesy in Zagreb


Solarić, Nikola; Barković, Đuro; Vučić, Nikola
Automated measurement with electrooptical distance meter and precise distance measurement processing at the calibration base of the faculty of geodesy in Zagreb // Proceedings of the 1st International Symposium Regional Metrology Organizations (RMO 2008) "Metrology, Testing, and Accreditation – Breaking the Trading Barriers" and the 20th International Metrology Symposium / Ilić, Damir ; Boršić, Mladen ; Jurčević, Marko (ur.).
Zagreb: Metrology Consulting, 2008. str. 224-226 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Automated measurement with electrooptical distance meter and precise distance measurement processing at the calibration base of the faculty of geodesy in Zagreb

Autori
Solarić, Nikola ; Barković, Đuro ; Vučić, Nikola

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 1st International Symposium Regional Metrology Organizations (RMO 2008) "Metrology, Testing, and Accreditation – Breaking the Trading Barriers" and the 20th International Metrology Symposium / Ilić, Damir ; Boršić, Mladen ; Jurčević, Marko - Zagreb : Metrology Consulting, 2008, 224-226

ISBN
978-953-95179-1-3

Skup
International Symposium Regional Metrology Organizations "Metrology, Testing, and Accreditation - Breaking the Trading Barriers" (1 ; 2008) ; International Metrology Symposium (20 ; 2008)

Mjesto i datum
Cavtat-Dubrovnik, Hrvatska, 12.-15.11.2008

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Calibration base; standard adjustment.

Sažetak
The paper describes the method of setting the parameters in the instrument Leica TC 2003 before going to the Calibration base for the purpose of automated precise distance measurement. Software has been developed for the automated distance measurement data processing for seven pillars of the Calibration base.In data processing there are standard deviations of measured distance mean values obtained from the measurement forward and backward. After the processing and adjustment of measured values, definite pillar ranges are obtained, as well as the addition correction. Apart from that, there are standard deviations of distance mean values from the measurements forward and backward computed depending on the distance, then standard deviations in determining the pillar ranges and standard deviations in determining the addition correction.This automated measurements and the processing of measured data will enable regular periodical adjustment of the Calibration Base of the Faculty of Geodesy, University of Zagreb, in accordance with the Book of Rules on Standard maintenance.

Izvorni jezik
Engleski

Znanstvena područja
Geodezija



POVEZANOST RADA


Projekt / tema
007-1201785-3539 - Razvoj znanstvenog mjeriteljskog laboratorija za geodetske instrumente (Nikola Solarić, )

Ustanove
Geodetski fakultet, Zagreb