Napredna pretraga

Pregled bibliografske jedinice broj: 374177

Experimental Analysis of Properties of Materials for Rapid Prototyping


Šercer, Mladen; Raos, Pero; Pilipović, Ana
Experimental Analysis of Properties of Materials for Rapid Prototyping // Proceedings of the 6th International Conference on Manufacturing Research : ICMR2008 ; u: Advances in Manufacturing Technology ; Vol. XXII / Cheng, Kai ; Makatsoris, Harris ; Harrison, David (ur.).
London, Velika Britanija: Brunel University, UK, 2008. str. 133-142 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Experimental Analysis of Properties of Materials for Rapid Prototyping

Autori
Šercer, Mladen ; Raos, Pero ; Pilipović, Ana

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 6th International Conference on Manufacturing Research : ICMR2008 ; u: Advances in Manufacturing Technology ; Vol. XXII / Cheng, Kai ; Makatsoris, Harris ; Harrison, David - : Brunel University, UK, 2008, 133-142

ISBN
978-1-902316-60-4

Skup
International Conference on Manufacturing Research (6 ; 2008)

Mjesto i datum
London, Velika Britanija, 09.- 11.09.2008

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
3D printing; hybrid Polyjet technique; roughness of surface; mechanical properties of materials

Sažetak
Rapid prototyping (RP) can substantially shorten the time and reduce the cost of developing a new product from the initial idea to production. Rapid prototyping can help in recognizing the basic defects whose subsequent correction may prove very expensive, especially if they are made already when the product is ready for production. There are also many restrictions of RP procedures primarily in the number of available materials and their properties, which may differ significantly from the properties of end product materials. In the work, based on the stipulated standards on the machines for 3D printing (ZPrinter 310 Plus) and hybrid Polyjet technique (Objet Eden 330), adequate test specimens were made and with adequate equipment, the analysis of the dimensions, roughness of surfaces, and mechanical properties of prototype test specimens was carried out. Then, based on the data obtained by testing of properties, a critical commentary has been provided regarding the data stipulated by their producers.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
120-1521473-1808 - Povišenje učinkovitosti razvoja i preradbe polimernih proizvoda (Mladen Šercer, )
152-1521473-1474 - Napredni postupci izravne izradbe polimernih proizvoda (Pero Raos, )

Ustanove
Fakultet strojarstva i brodogradnje, Zagreb,
Strojarski fakultet, Slavonski Brod