Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Numerical model and procedure for determination of stresses in spur gears teeth flanks (CROSBI ID 543839)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Basan, Robert ; Franulović, Marina ; Križan, Božidar Numerical model and procedure for determination of stresses in spur gears teeth flanks // Mechanical Engineering SI 2008 - Proceedings of Papers / Starek, L. / Hučko, B. (ur.). Bratislava: Slovak University of Technology Press, 2008

Podaci o odgovornosti

Basan, Robert ; Franulović, Marina ; Križan, Božidar

engleski

Numerical model and procedure for determination of stresses in spur gears teeth flanks

Pitting of gears teeth flanks is one of the most pronounced type of damage that occurs in gears. Although it can manifest itself in a number of different forms, it is direct consequence of highly concentrated cyclic stresses and strains which develop in tooth flank material during the mesh in conditions of simultaneous rolling and sliding contact. Due to such rather complex state of stress and strain that changes during the mesh, identification of critical locations in regard to fatigue damage and crack initiation is difficult task and requires detailed numerical analysis. For the determination of mentioned stresses and strains and their evolution during the mesh, a numerical model gear pair in mesh was developed and complete analysis procedure defined.

numerical analysis; FE; spur gears; contact stresses; tooth flanks

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

2008.

objavljeno

Podaci o matičnoj publikaciji

Mechanical Engineering SI 2008 - Proceedings of Papers

Starek, L. / Hučko, B.

Bratislava: Slovak University of Technology Press

978-80-227-2982-6

Podaci o skupu

12th International Conference on Mechanical Engineering 2008

predavanje

13.11.2008-14.11.2008

Bratislava, Slovačka

Povezanost rada

Strojarstvo