Designing high performance grout for corrosion protection of prestressing steel in concrete (CROSBI ID 542662)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Stipanović Oslaković, Irina ; Serdar, Marijana ; Bjegović, Dubravka
engleski
Designing high performance grout for corrosion protection of prestressing steel in concrete
Portland cement grout is used in post-tensioned and retaining structures to provide bond between prestressing steel and surrounding material and to transmit the stresses from the steel to the concrete. Other important role of the grout is to fill the voids between protective duct and prestressing steel, suppressing the flow of water and chloride ions. The grout is the last but most important corrosion protection layer in prestressed structures. Therefore, besides satisfying requirements for the mechanical and physical properties, high performance grout should have capability of protecting prestressing steel from corrosion. The aim of the research presented in this paper was to evaluate the influence of different grout mixtures on corrosion behaviour of prestressing steel. First, thorough investigation of mechanical and physical properties of different grout mixtures was performed, such as: dimensional stability, fluidity, bleeding and strength development. After that seven high performance grout mixtures were chosen for testing of chloride penetration corrosion testing. From the presented research it can be concluded that high performance grout with low chloride diffusion coefficient, good homogeneity and volume persistency can assure longer durability of prestressed structures.
grout; prestressed concrete; prestressing steel; chloride diffusion; corrosion
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
150-150.
2008.
objavljeno
Podaci o matičnoj publikaciji
Managing Corrosion for Sustainability
Edinburgh: Deutsche Gesellschaft für chemisches Apparatewesen (DECHEMA)
Podaci o skupu
Eurocorr 2008
predavanje
07.09.2008-11.09.2008
Edinburgh, Ujedinjeno Kraljevstvo