Testing of Concrete Sewer Pipes (CROSBI ID 542584)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Rajab, Roden ; Rak, Mladenko ; Šimić, Diana ; Damjanović, Domagoj
engleski
Testing of Concrete Sewer Pipes
The materials and the production modes should meet special fabrication conditions. With regard to crown pressure strength and depending on the pipe’ s diameter the load volume per the pipe’ s length unit is prescribed. The 28 day old pipe should be able to resist that load. The sensors measuring radial displacements in two orthogonal directions on the basis for the D=500 pipe and on the basis of 300 mm for the D=300 mm pipe are on the 1, 2, 3, 4 measuring places. On the 5 and 6 measuring places are the sensors on the 50 mm basis for both pipes measuring relative strains in a circular direction.
experimental testing; displacement; strain; breaking load; FE numerical model
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
219-220.
2008.
objavljeno
Podaci o matičnoj publikaciji
25th Danubia-Adria Symposium on Advances in Experimental Mechanics : proceedings
Daniel, M. ; Holy, S. ; Ružička, M
Prag: Czech technical university in Prague
978-80-01-04162-8
Podaci o skupu
Danubia-Adria Symposium on Advances in Experimental Mechanics (25 ; 2008)
predavanje
24.09.2008-27.09.2008
České Budějovice, Češka Republika; Český Krumlov, Češka Republika