Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 367118

SMC knot versus SAK - an in vitro comparison of knot security


Klobučar, Hrvoje; Tršek, Denis; Semenski, Damir; Karlović, Sven; Čičak, Nikola
SMC knot versus SAK - an in vitro comparison of knot security // Abstract book of 21th Congress of the European Society for Surgery of the Shoulder and Elbow
Brugge, Belgija, 2008. str. 136-136 (predavanje, međunarodna recenzija, sažetak, ostalo)


CROSBI ID: 367118 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
SMC knot versus SAK - an in vitro comparison of knot security

Autori
Klobučar, Hrvoje ; Tršek, Denis ; Semenski, Damir ; Karlović, Sven ; Čičak, Nikola

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, ostalo

Izvornik
Abstract book of 21th Congress of the European Society for Surgery of the Shoulder and Elbow / - Brugge, Belgija, 2008, 136-136

Skup
21th Congress of the European Society for Surgery of the Shoulder and Elbow

Mjesto i datum
Brugge, Belgija, 17.09.2008. - 20.09.2008

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
biomechanical analysis; mechanical testing; knot

Sažetak
Purpose The study in vitro compares primary fixation strength of two arthroscopic flip knots ; clinical knot security and ultimate load to failure. SMC knot is well known and frequently used arthroscopic knot. SAK (Secure Arthroscopic Knot) is fully instrumental knot, easy to master, with short learning curve. Last 10 years it is predominantly used by senior author in arthroscopic shoulder procedures. Material and Methods Curved metal rods are put in grips of the Universal Testing Machine and positioned centraly in vertical orientation 5 mm apart. The curvature of each rod was wrapped with 2 mm thick deerskin soaked in saline. Arthorscopic canulla was positioned in holder on the same position during testing procedure for all knots. Knots - 8 SAKs and 8 SMCs - were constructed outside the canulla, slided and positioned with arthroscopic knot pusher on the concave side of the caudal rod. Four additional loops (left-right alternatively) were put on the knot. Orthocord was used in all procedures, and all knots were performed by the same surgeon. The construct was preloaded with 7 N and distracted 0, 2 mm/s. Ultimate tensile load and load to failure were determined. Clinical load to failure is defined as force that distract knot for 3 mm. Data distribution was analysed and parametric statistics was performed. Results Clinical failure for SAK is 249± 29 N, and for SMC 191± 40 N, and this difference is significant on the level of 5 %. Ultimate failure of SAK is 292± 34 N and for SMC 276± 39 N, and this difference is not significant.SAK failured with breakage in 7 out of 8 measurments, and SMC failured equaly by slipage and breakage. Conclusion The study imitated in vivo condition, deerskin simulated human tissue and eliminated slipage of knots. Both knots are equally strong regarding ultimate load to failure in hands of the experienced shoulder arthroscopist. Secure arthroscopic knot (SAK) presented greater load to clinical failure comparing with SMC knot. Autors can recomend SAK as an easy and safe arthroscopic flip knot.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Kliničke medicinske znanosti, Prehrambena tehnologija



POVEZANOST RADA


Projekti:
058-0581846-0422 - Pripremanje sirovina i određivanje teksturalnih svojstava prehrambenih proizvoda (Ježek, Damir, MZOS ) ( CroRIS)
058-0581846-0717 - Primjena ultrazvuka u prehrambenoj tehnologiji i biotehnologiji (Tripalo, Branko, MZOS ) ( CroRIS)
108-0000000-0164 - Nove metode u dijagnostici i liječenju bolesti i ozljeda ramena (Čičak, Nikola, MZOS ) ( CroRIS)
120-0362321-2198 - Numerička i eksperimentalna istraživanja nelinearnih mehaničkih sustava (Wolf, Hinko, MZOS ) ( CroRIS)

Ustanove:
Prehrambeno-biotehnološki fakultet, Zagreb,
Fakultet strojarstva i brodogradnje, Zagreb

Profili:

Avatar Url Sven Karlović (autor)

Avatar Url Nikola Čičak (autor)

Avatar Url Hrvoje Klobučar (autor)

Avatar Url Damir Semenski (autor)


Citiraj ovu publikaciju:

Klobučar, Hrvoje; Tršek, Denis; Semenski, Damir; Karlović, Sven; Čičak, Nikola
SMC knot versus SAK - an in vitro comparison of knot security // Abstract book of 21th Congress of the European Society for Surgery of the Shoulder and Elbow
Brugge, Belgija, 2008. str. 136-136 (predavanje, međunarodna recenzija, sažetak, ostalo)
Klobučar, H., Tršek, D., Semenski, D., Karlović, S. & Čičak, N. (2008) SMC knot versus SAK - an in vitro comparison of knot security. U: Abstract book of 21th Congress of the European Society for Surgery of the Shoulder and Elbow.
@article{article, author = {Klobu\v{c}ar, Hrvoje and Tr\v{s}ek, Denis and Semenski, Damir and Karlovi\'{c}, Sven and \v{C}i\v{c}ak, Nikola}, year = {2008}, pages = {136-136}, keywords = {biomechanical analysis, mechanical testing, knot}, title = {SMC knot versus SAK - an in vitro comparison of knot security}, keyword = {biomechanical analysis, mechanical testing, knot}, publisherplace = {Brugge, Belgija} }
@article{article, author = {Klobu\v{c}ar, Hrvoje and Tr\v{s}ek, Denis and Semenski, Damir and Karlovi\'{c}, Sven and \v{C}i\v{c}ak, Nikola}, year = {2008}, pages = {136-136}, keywords = {biomechanical analysis, mechanical testing, knot}, title = {SMC knot versus SAK - an in vitro comparison of knot security}, keyword = {biomechanical analysis, mechanical testing, knot}, publisherplace = {Brugge, Belgija} }




Contrast
Increase Font
Decrease Font
Dyslexic Font