Indentation Size Effect in the Vickers Hardness for Alumina Ceramics (CROSBI ID 541295)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Ćurković, Lidija ; Lalić, Marijo ; Šolić, Sanja
engleski
Indentation Size Effect in the Vickers Hardness for Alumina Ceramics
Objective of this study is to determine the effect of indentation load on the Vickers hardness of cold isostatically pressed (CIP) high purity alumina (Al2O3) ceramics. Specimen of a CIP-Al2O3 ceramics was embedded in DuroFix-2 Kit, polished, then indented at loads ranging between 0.1, 0.2 and 0.5 kg with a Vickers hardness tester (n=30 per load). This study show that conventional hardness measurements are load-dependent, which implies a substantial influence of the indentation size effect (ISE). The ISE was described through the application of the Mayer Law, a proportional specimen resistance (PSR) model and a modified PSR model.
hardness; indentation size effect; alumina ceramics
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
1097-1100.
2008.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 12th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" : TMT 2008
Ekinović, Sabahudin ; Yalcin, Senay ; Vivancos Calvet, Joan
Zenica:
978-9958-617-41-6
Podaci o skupu
12th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology"
poster
26.08.2008-30.08.2008
Istanbul, Turska