Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Testing the Impact of Hydrodesulphurisation Process Parameters on Diesel Fuel Properties (CROSBI ID 539916)

Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija

Fabulić Ruszkowski, Maja ; Radošević, Marko ; Bolf, Nenad ; Ivandić, Marina Testing the Impact of Hydrodesulphurisation Process Parameters on Diesel Fuel Properties // Proceedings the 35th International Conference of Slovak Society of Chemical Engineering / Markoš, Jozef (ur.). Bratislava: Slovak Society of Chemical Engineering, 2008. str. 1-1

Podaci o odgovornosti

Fabulić Ruszkowski, Maja ; Radošević, Marko ; Bolf, Nenad ; Ivandić, Marina

engleski

Testing the Impact of Hydrodesulphurisation Process Parameters on Diesel Fuel Properties

In this paper the influence of changes in hydrodesulphurisation (HDS) process parameters (space velocity and temperature) on efficiency of sulphur compounds removal was tested. The feedstock, straight run gas oils (STGO) from Croatian crude oil used for diesel fuel production have been subject to the hydrodesulphurisation process with Co-Mo/Al2O3 commercial catalyst in a trickle bed reactor in high-pressure apparatus at the following conditions: total reactor pressure of 500 kPa, reactor inlet temperature in the range 330 - 355 °C, liquid hourly space velocity (LHSV) in the range 2.0, 2.5 and 3.0 h-1 and hydrogen/hydrocarbons ratio of 120. The laboratory high-pressure apparatus was upgraded by implementation of a modern computer-based control system. Control system supports experimentation aiming better process conditions monitoring and control with the purpose of improved repeatability and achievement of safe operation.

diesel fuel ; hydrodesulphurization process ; process monitoring ; process control

In this work it the influence of changes in hydrodesulphurisation (HDS) process parameters (space velocity and temperature) on efficiency of sulphur compounds removal was tested. The l feedstock, straight run gas oils (STGO) from Croatian crude oil used for diesel fuel production have been subject to the hydrodesulphurisation process with Co-Mo/Al2O3 commercial catalyst in a trickle bed reactor in high-pressure apparatus at the following conditions: total reactor pressure of 500 kPa, reactor inlet temperature in the range 330 - 355 °C, liquid hourly space velocity (LHSV) in the range 2.0, 2.5 and 3.0 h-1 and hydrogen/hydrocarbons ratio of 120. The laboratory high-pressure apparatus was upgraded by implementation of a modern computer-based control system. Control system supports experimentation aiming better process conditions monitoring and control with the purpose of improved repeatability and achievement of safe operation.

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

1-1.

2008.

objavljeno

Podaci o matičnoj publikaciji

Proceedings the 35th International Conference of Slovak Society of Chemical Engineering

Markoš, Jozef

Bratislava: Slovak Society of Chemical Engineering

978-80-227-2903-1

Podaci o skupu

International Conference of Slovak Society of Chemical Engineering (35 ; 2008)

poster

26.05.2008-30.05.2008

Tatranské Matliare, Slovačka

Povezanost rada

Kemijsko inženjerstvo