High Speed Machining of Mg-Casting (CROSBI ID 539863)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Hansen, Rolf Sten ; Rasch, Finn Ola ; Tomac, Nikola ; Tonnessen, Kjell
engleski
High Speed Machining of Mg-Casting
When magnesim alloys are machined with HSS and carbide tools at high cutting speed (> 550 m/min) , the workpiece material may build up on the flank surface of the tool. This phenomenon causes a severe deterioration of the surface finish and sharp increase in tool forces. In many machining operations this is a limiting factor with respect to rising the cutting speed which is desirable for productivity reasons.
High Speed Machining; Mg-Casting; Build-up Edge
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
1992.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of International Conference on Magnesium Alloys
Garmisch-Partenkirchen:
Podaci o skupu
International Conference on Magnesium Alloys
predavanje
08.04.1992-10.04.1992
Garmisch-Partenkirchen, Njemačka