Analysis of abrasive wear resistance of the d2 tool steel in relation to heat treatment (CROSBI ID 539751)
Prilog sa skupa u časopisu | prošireni sažetak izlaganja sa skupa
Podaci o odgovornosti
Goršćak, Đurđica ; Filetin, Tomislav ; Grilec, K. ; Godec, M. ; Kapudija, D.
engleski
Analysis of abrasive wear resistance of the d2 tool steel in relation to heat treatment
Heat treatment significantly influences wear resistance of the tool steels. D2 is suitable for the cutting and forming cold work tools. Heat treatment of the parts must be in accordance with the function of the tool positions. When high austenitized, it is suitable for application of PVD coatings which further enhance its operating characteristics. This article refers to relationship between the hardened-and-tempered condition of this tool steel and its abrasive wear resistance. The samples were subjected to the different heat treatment parameters, then were tested using dry sand and rubber wheel method. Microstructural analysis of the representative samples is presented and related to the obtained results of the dry sand/rubber wheel test.
D2 tool steel ; heat treatment ; abrasive wear resistance
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
131-132.
2008.
nije evidentirano
objavljeno
Podaci o matičnoj publikaciji
Materiali in tehnologije
Leskovšek, Vojteh ; Smoljan, Božo ; Jager, Heimo ; Jenko, Monika
Ljubljana: Inštitut za kovinske materiale in tehnologije
1580-2949
1580-3414
Podaci o skupu
2nd International Conference on the Heat Treatment and Surface Engineering of Tools and Dies
ostalo
25.05.2008-28.05.2008
Bled, Slovenija