Improvement of Laser Beam Cutability of QStE 380N Steel (CROSBI ID 472000)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Cebalo, Roko ; Stoić, Antun ; Cukor, Goran
engleski
Improvement of Laser Beam Cutability of QStE 380N Steel
It is possible to decrease the laser beam cutting costs by correct determination of cutting parameters. Production costs have a lot of sources and maximum reducing is achievable by performing the multifactor analysis of influencing factors. In this paper, the influence of cutting speed and cutting gas pressure are analyzed. Each of these parameters strongly influence the obtained cut quality. Surface roughness, as indicator of cutting ability, is usually functional value which is dependent on cutting parameters. For its optimization, it is necessary to determine the optimal cutting parameters. Further reducing of production costs is possible by the optimization of material utilization and laser cutting head path. Reducing of cutting time (number of machine hours) is obtainable by the selection of good cutting order of cutout, and by reducing a number of free movement.
Laser Beam Cutting Parameters; Cut Quality; Cutting Costs
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
IV-153-161-x.
1999.
objavljeno
Podaci o matičnoj publikaciji
CIM '99 Computer Integrated Manufacturing and High Speed Machining
Cebalo, Roko ; Schulz, Herbert
Opatija: Hrvatska udruga proizvodnog strojarstva (HUPS)
Podaci o skupu
5th International Scientific Conference on production Engineering
predavanje
17.06.1999-18.06.1999
Opatija, Hrvatska