Application of the Vibration Signal in the Feedback System for the Milling Machines (CROSBI ID 471987)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Hnatko, Emil ; Majdandžić, Niko ; Raos, Pero
engleski
Application of the Vibration Signal in the Feedback System for the Milling Machines
There is a positive co-relation between the strength of the vibration signal and the depth of the drilling. The Research paper examines the relation between the vibration signal of the diagnostic apparatus DI-1100 and the depth-of-cut at which the milling machines is operating. from the relation, the feedback signal is defined through the diagnostic sensor, and is used to control the depth of the cut. on the basis of the impulsion transfer function for the milling machine with the lead controller, feedback model for the milling machine has been worked out.
vibration signal; depth-of-cut; milling machine; feedback system
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
II-31 - II-040-x.
1999.
objavljeno
Podaci o matičnoj publikaciji
CIM '99 Computer Integrated Manufacturing and High Speed Machining
Cebalo, Roko ; Schulz, Herbert
Opatija: Hrvatska udruga proizvodnog strojarstva (HUPS)
Podaci o skupu
5. International Scientific Conference on Production Engineering CIM '99
predavanje
17.06.1999-18.06.1999
Opatija, Hrvatska