Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Analysis of material transfer by rollers (CROSBI ID 537475)

Prilog sa skupa u zborniku | stručni rad | međunarodna recenzija

Karabegović, Isak ; Ujević, Darko ; Hodžić, Damir Analysis of material transfer by rollers // Proceedings of the seventh International Symposium on Tools and Methods of Competitive Engineering - TMCE 2008 / Horváth, Imre ; Rusák, Zoltán (ur.). Delft: Faculty of Industrial Design Engineering, Delft University of Technology, 2008. str. 1791-1794

Podaci o odgovornosti

Karabegović, Isak ; Ujević, Darko ; Hodžić, Damir

engleski

Analysis of material transfer by rollers

In the material sewing process always occurs problems in the material transfer whether the transfer is made by footsteps or rollers. In this paper there has been analyzed in details material transfer by rollers with same diameter and case when both rollers are driving rollers and the case in which only one roller is driving-roller. There are analyzed conditions in which material transfer by rollers is possible. Also there are analyzed forces which are required to enable material transfer.

transfer; material; rollers; sewing process

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

1791-1794.

2008.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the seventh International Symposium on Tools and Methods of Competitive Engineering - TMCE 2008

Horváth, Imre ; Rusák, Zoltán

Delft: Faculty of Industrial Design Engineering, Delft University of Technology

978-90-5155-044-3

Podaci o skupu

Seventh International Symposium on Tools and Methods of Competitive Engineering - TMCE 2008

poster

21.04.2008-25.04.2008

İzmir, Turska

Povezanost rada

Tekstilna tehnologija