Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Experimental and Numerical Investigation of Failure Pressure of Valve Housing (CROSBI ID 535889)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Galić, Ivica ; Tonković, Zdenko ; Vučković, Krešimir Experimental and Numerical Investigation of Failure Pressure of Valve Housing // Proceedins on CD of the 1st International Conference of Engineering Against Fracture / Pantelakis S. (ur.). Patras, 2008

Podaci o odgovornosti

Galić, Ivica ; Tonković, Zdenko ; Vučković, Krešimir

engleski

Experimental and Numerical Investigation of Failure Pressure of Valve Housing

This paper presents an experimental and finite element analysis which are conducted to determine the allowable and failure pressures in unflawed valve housing, designation DN100 PN40. Extensive three-dimensional non-linear finite element analyses are performed to obtain the plastic limit, collapse and instability loads for valve housing under internal pressure and to predict the burst pressure obtained by the experimental tests. Finite element results show that the failure pressures obtained by limit load analyses give conservative results, except those obtained by using ultimate tensile stress as the flow stress. It is shown that the plastic collapse pressure results, obtained by a real strain hardening material model agree well with the experimental results.

burst pressure; finite element analysis; plastic collapse pressure; valve housing

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

2008.

objavljeno

Podaci o matičnoj publikaciji

Proceedins on CD of the 1st International Conference of Engineering Against Fracture

Pantelakis S.

Patras:

Podaci o skupu

International Conference of Engineering Against Fracture (1 ; 2008)

predavanje

28.05.2008-30.05.2008

Patras, Grčka

Povezanost rada

Strojarstvo