Napredna pretraga

Pregled bibliografske jedinice broj: 335939

The Measuring Comparison between Nocontact Digitizing System and Contact Coordinate Measuring System


Barišić, Branimir; Rucki, Miroslaw; Čalić, Bruno; Gomerčić, Mladen
The Measuring Comparison between Nocontact Digitizing System and Contact Coordinate Measuring System // Proceedings of the 9th International Conference on Management of Innovative Technologies / Junkar Mihael (ur.).
Piran-Fiesa: TAVO Slovene Society for Abrasive Water Jet Technology, 2007. str. 144-151 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
The Measuring Comparison between Nocontact Digitizing System and Contact Coordinate Measuring System

Autori
Barišić, Branimir ; Rucki, Miroslaw ; Čalić, Bruno ; Gomerčić, Mladen

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 9th International Conference on Management of Innovative Technologies / Junkar Mihael - Piran-Fiesa : TAVO Slovene Society for Abrasive Water Jet Technology, 2007, 144-151

ISBN
978-961-6536-19-6

Skup
9th International Conference on Management of Innovative Technologies

Mjesto i datum
Fiesa, Slovenija, 09-10.10.2007

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Digitizing Measuring System; Coordinate Measuring System; Inspection

Sažetak
The comparison of measurement by means of modern nocontact digitizing system and traditional contact measuring system is the goal of the paper. Different measuring methods using nocontact and contact measuring systems are compared. Three-dimensional digitization could be defined as a process of measuring of enormous points number on a part in order to create a digital model of the same part in the numerical 3D form. Traditional coordinate measuring could be defined as a process of points collecting from an object by touching its surface. Sometimes, the using the traditional measuring machines such as mechanical 3D coordinate measuring devices, because of the large dimensions of the measuring object, is impossible and this opportunities gives a numerous advantages to digitizing systems (example study 1 in the paper). Presented example (example study 2 in the paper) of compared measurements shows that measurement of functional coordinates (plane, circle, slot, line and cone) at the same measuring conditions could be speed up a lot of times.

Izvorni jezik
Engleski

Znanstvena područja
Računarstvo, Strojarstvo, Temeljne tehničke znanosti



POVEZANOST RADA


Projekt / tema
069-1201787-1754 - Numeričko modeliranje, simulacija i optimizacija u oblikovanju lima (Zlatan Car, )

Ustanove
Tehnički fakultet, Rijeka