Napredna pretraga

Pregled bibliografske jedinice broj: 335726

Experimental determination of mechanical properties and short-time creep of AISI 304 steel at elevated temperatures


Brnić, Josip; Niu, Jitai; Turkalj, Goran; Čanađija, Marko; Lanc, Domagoj
Experimental determination of mechanical properties and short-time creep of AISI 304 steel at elevated temperatures // International Journal of Minerals, Metallurgy and Materials, 17 (2010), 1; 39-45 doi:10.1007/s12613-010-0107-0 (međunarodna recenzija, članak, znanstveni)


Naslov
Experimental determination of mechanical properties and short-time creep of AISI 304 steel at elevated temperatures

Autori
Brnić, Josip ; Niu, Jitai ; Turkalj, Goran ; Čanađija, Marko ; Lanc, Domagoj

Izvornik
International Journal of Minerals, Metallurgy and Materials (1674-4799) 17 (2010), 1; 39-45

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
AISI 304; mechanical properties at elevated temperature; creep tests; constitutive model

Sažetak
The high temperature properties of AISI 304 stainless steel were studied. Basic data about the employed experimental equipment, testing procedures, and specimen geometry were given. The experimental setup was used to obtain stress-strain diagrams from tensile tests at room temperature as well as several elevated temperatures. Furthermore, the specimens were subjected to short-time creep tests at various temperatures. Stress levels for creep testing were established as a percentage of yield stress. The results indicate that at lowered temperatures and lower stress levels, AISI 304 stainless steel can be used as a sufficiently creep resistant material. as well as several elevated temperatures. Furthermore, specimens are subjected to short-time creep tests at various temperatures. Stress levels for creep testing are established as a percentage of yield stress. Based on obtained results, constitutive model is derived. Some conclusions about material short-time creep resistance are also noted.elevated temperatures. Furthermore, specimens are subjected to short-time creep at various temperatures. Stress levels for creep testing are established as a percentage of yield stress. Based on obtained results, constitutive model is derived. Some conclusions about material short-time creep resistance are also noted.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti



POVEZANOST RADA


Projekt / tema
069-0691736-1731 - Konačnoelementni modeli za analizu stabilnosti grednih konstrukcija (Goran Turkalj, )
069-0691736-1737 - Numerička analiza odziva konstrukcija za određena područja eksploatacije (Josip Brnić, )

Ustanove
Tehnički fakultet, Rijeka

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Uključenost u ostale bibliografske baze podataka:


  • CAB Abstracts
  • Computer and Information Systems Abstracts
  • EMBASE (Excerpta Medica)
  • Advanced Polymer Abstracts
  • Aluminum Industry Abstracts
  • Astrophysics Data System (ADS)
  • Ceramic Abstracts - World Ceramic Abstracts
  • Chemical Abstracts Service (CAS)
  • Compendex
  • Composites Industry Abstracts
  • Copper Data Center Database
  • Corrosion Abstracts
  • CSA
  • Engineered Materials Abstracts
  • SCOPUS


Citati