Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

CONTROL OF THE CUTTING FORCES IN TURNING BY ENTRY ANGLE AND CUTTING INSERTS GEOMETRY (CROSBI ID 137338)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Udiljak, Toma ; Škorić, Stephan ; Ciglar, Damir CONTROL OF THE CUTTING FORCES IN TURNING BY ENTRY ANGLE AND CUTTING INSERTS GEOMETRY // Strojniški vestnik, 54 (2008), 1; 56-61

Podaci o odgovornosti

Udiljak, Toma ; Škorić, Stephan ; Ciglar, Damir

engleski

CONTROL OF THE CUTTING FORCES IN TURNING BY ENTRY ANGLE AND CUTTING INSERTS GEOMETRY

Machinability is assessed by a set of criteria or machinability functions, the knowledge of which is necessary in optimising the machining process. New cutting tool materials and new concepts of the machine tools provide new possibilities and cause quantitative changes in machinability functions. This work has studied the cutting forces function, as one of the crucial machinability function. The research was done at longitudinal turning of steel 16MnCr5. Coated carbide inserts for roughing and finishing with different inclination angles were used, and tool clamping system has enabled the changes of entry angle. Obtained results confirm that entry angle and geometry of cutting insert significantly influence cutting forces especially thrust cutting force.

cutting forces; entry angle; turning; geometry of cutting insert

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

54 (1)

2008.

56-61

objavljeno

0039-2480

Povezanost rada

Strojarstvo

Indeksiranost