Napredna pretraga

Pregled bibliografske jedinice broj: 321976

Analysis of constraint effect on fracture behaviour of mis-match welded joint


Gubeljak, Nenad; Scheider, Ingo; Predan, Jožef; Kozak, Dražan; Tuma, Jelena
Analysis of constraint effect on fracture behaviour of mis-match welded joint // Technological and material challenges in welding, fabrication and inspection : Proceedings of the International Institute of Welding International Congress 2008 (IIW-IC-2008) / Bhaduri, A. K. ; Vasudevan, M ; Albert, S. K. (ur.).
Chennai: The Indian Institute of Welding, Chennai Branch, 2008. str. 448-458 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Analysis of constraint effect on fracture behaviour of mis-match welded joint

Autori
Gubeljak, Nenad ; Scheider, Ingo ; Predan, Jožef ; Kozak, Dražan ; Tuma, Jelena

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Technological and material challenges in welding, fabrication and inspection : Proceedings of the International Institute of Welding International Congress 2008 (IIW-IC-2008) / Bhaduri, A. K. ; Vasudevan, M ; Albert, S. K. - Chennai : The Indian Institute of Welding, Chennai Branch, 2008, 448-458

Skup
International Institute of Welding International Congress 2008 (IIW-IC-2008): Technological and material challenges in welding, fabrication and inspection

Mjesto i datum
Chennai, Indija, 08-10.01.2008.

Vrsta sudjelovanja
Pozvano predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Mis-match welded joint; fracture behaviour; constraint; CTOD values

Sažetak
The differences in mechanical properties amongst different welded joints' regions obviously affect the strain distribution around the crack tip during the fracture test and, hence, influence the toughness value. The strength mis-match and width of welded joint have an effect on the stress-strain distribution in the vicinity of the crack tip. Both can contribute to a higher constraint in the weld metal. It was found in a combined experimental and numerical study that the width of the welded joint as a constraint parameter has an effect on the limit load, maximum load and achieved fracture toughness values of a welded joint. In the case of strength overmatched welded joints, the limit and maximum loads increase with decreasing constraint, i.e. with increasing weld width. On th contrary, in the case of strength undermatched welded joints the limit and maximum loads and the constraint decrease with the width of the welded joint width.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
152-1201910-1909 - Analiza i procjena loma konstrukcija iz anizotropnih materijala (Dražan Kozak, )

Ustanove
Strojarski fakultet, Slavonski Brod