The influence of forging temperature, deformation degree and heat treatment on the mechanical properties of ship axles (CROSBI ID 529849)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Begovac, Fuad ; Oruč, Mirsada ; Vitez, Ivan
engleski
The influence of forging temperature, deformation degree and heat treatment on the mechanical properties of ship axles
Forgings of ship axles are the group of middle and large forgings. They are produced by free forging on hydraulic presses, and production technology alone is very complex, careful lasting long time, and very expensive. In aiming observation and innovation of forging and heat treatment technology in this paper are presented performed mechanical testing and structural characteristics examination of forgings made from carbon steel (internal mark LRK). These forgings are one or two times normalisation annealed under the industrial scale conditions.
ship axles; temperature; deformation degree; normalisation annealing; mechanical properties
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
99-102-x.
2007.
objavljeno
Podaci o matičnoj publikaciji
11th International Research/Expert Conference TRENDS IN THE DEVELOPMENT OF MACHINERY AND ASSOCIATED TECHNOLOGY, TMT 2007, Proceedings
Ekinović, Sabahudin ; Yalcin, Senay ; Vivancos Calvet, Joan
Hammamet: Faculty of Mechanical Engineering in Zenica, Fakultetska 1, Zenica, BiH ; Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Department d' Enginyeria Mechanica, Universitat Politecnica de Catalunya, Spain, Bahcesehit University Istanbul, Muhen
978-9958-617-34-8
Podaci o skupu
11th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2007
predavanje
05.09.2007-09.09.2007
Hammamet, Tunis
