Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 306041

Granulometric analysis of chips generated from planing of different species of wood


Beljo Lučić, Ružica; Čavlović, Ankica; Ištvanić Josip; Đukić, Igor; Kovačević, Dalibor
Granulometric analysis of chips generated from planing of different species of wood // Woodworking techniques / Goglia, Vlado ; Barcik, Štefan (ur.).
Zagreb: Faculty of Forestry, Zagreb, Croatia, 2007. str. 207-213 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 306041 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Granulometric analysis of chips generated from planing of different species of wood

Autori
Beljo Lučić, Ružica ; Čavlović, Ankica ; Ištvanić Josip ; Đukić, Igor ; Kovačević, Dalibor

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Woodworking techniques / Goglia, Vlado ; Barcik, Štefan - Zagreb : Faculty of Forestry, Zagreb, Croatia, 2007, 207-213

ISBN
953-6307-94-4

Skup
2nd International Scientific Conference „ Woodworking Techniques 2007“

Mjesto i datum
Zalesina, Hrvatska, 11-15. 09. 2007

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
kestenovina; orahovina; trešnjevina; blanjanje; distribucija veličine čestica
(walnut-wood; cherry-wood; horse chestnut-wood; planing; particle size distribution)

Sažetak
The objective of this paper was to investigate the influence of feed speed, cutting depths and wood characteristics on particle size distribution of chips generated in planing of solid walnut-wood (Juglans regia L.), cherry-wood (Prunus avium L.) and horse chestnut-wood (Castanea sativa Mill.). Granulometric analysis of chips generated in planing of radial, semi-radial and tangential boards at two different feed speeds (vf1= 6 m/min and vf2 = 12 m/min) and two cutting depths (h1= 2 mm and h2 = 5 mm) is presented. The results showed that the biggest share of chips is made of particles from 2 to 8 millimetres. The sample of chipped wood generated in planing of chestnut wood is mostly made of particles up to 4 mm, while in planing of walnut and cherry wood under the same conditions the generated particles are usually larger than 4 mm. The increase of feed speed affects the increase of share of larger particles and decrease of share of small fractions. Difference in cutting depth has no considerable influence on particle size/distribution of chips.

Izvorni jezik
Engleski

Znanstvena područja
Šumarstvo

Napomena
Čavlović Ankica se u bibl. bazi vodi još pod imenom Ankica Kos (237132)



POVEZANOST RADA


Projekti:
068-0682094-2095 - Optimiranje energijskih i ergonomskih čimbenika mehaničke obrade drva (Ozana Čavlović, Anka, MZOS ) ( POIROT)

Ustanove:
Šumarski fakultet, Zagreb

Citiraj ovu publikaciju

Beljo Lučić, Ružica; Čavlović, Ankica; Ištvanić Josip; Đukić, Igor; Kovačević, Dalibor
Granulometric analysis of chips generated from planing of different species of wood // Woodworking techniques / Goglia, Vlado ; Barcik, Štefan (ur.).
Zagreb: Faculty of Forestry, Zagreb, Croatia, 2007. str. 207-213 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Beljo Lučić, R., Čavlović, A., Ištvanić Josip, Đukić, I. & Kovačević, D. (2007) Granulometric analysis of chips generated from planing of different species of wood. U: Goglia, V. & Barcik, Š. (ur.)Woodworking techniques.
@article{article, year = {2007}, pages = {207-213}, keywords = {walnut-wood, cherry-wood, horse chestnut-wood, planing, particle size distribution}, isbn = {953-6307-94-4}, title = {Granulometric analysis of chips generated from planing of different species of wood}, keyword = {walnut-wood, cherry-wood, horse chestnut-wood, planing, particle size distribution}, publisher = {Faculty of Forestry, Zagreb, Croatia}, publisherplace = {Zalesina, Hrvatska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font