Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Granulometric analysis of chips generated from planing of different species of wood (CROSBI ID 529760)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Beljo Lučić, Ružica ; Čavlović, Ankica ; Ištvanić Josip ; Đukić, Igor ; Kovačević, Dalibor Granulometric analysis of chips generated from planing of different species of wood // Woodworking techniques / Goglia, Vlado ; Barcik, Štefan (ur.). Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2007. str. 207-213-x

Podaci o odgovornosti

Beljo Lučić, Ružica ; Čavlović, Ankica ; Ištvanić Josip ; Đukić, Igor ; Kovačević, Dalibor

engleski

Granulometric analysis of chips generated from planing of different species of wood

The objective of this paper was to investigate the influence of feed speed, cutting depths and wood characteristics on particle size distribution of chips generated in planing of solid walnut-wood (Juglans regia L.), cherry-wood (Prunus avium L.) and horse chestnut-wood (Castanea sativa Mill.). Granulometric analysis of chips generated in planing of radial, semi-radial and tangential boards at two different feed speeds (vf1= 6 m/min and vf2 = 12 m/min) and two cutting depths (h1= 2 mm and h2 = 5 mm) is presented. The results showed that the biggest share of chips is made of particles from 2 to 8 millimetres. The sample of chipped wood generated in planing of chestnut wood is mostly made of particles up to 4 mm, while in planing of walnut and cherry wood under the same conditions the generated particles are usually larger than 4 mm. The increase of feed speed affects the increase of share of larger particles and decrease of share of small fractions. Difference in cutting depth has no considerable influence on particle size/distribution of chips.

walnut-wood; cherry-wood; horse chestnut-wood; planing; particle size distribution

Čavlović Ankica se u bibl. bazi vodi još pod imenom Ankica Kos (237132)

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

207-213-x.

2007.

objavljeno

Podaci o matičnoj publikaciji

Woodworking techniques

Goglia, Vlado ; Barcik, Štefan

Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu

953-6307-94-4

Podaci o skupu

2nd International Scientific Conference „ Woodworking Techniques 2007“

predavanje

11.09.2007-15.09.2007

Zalesina, Hrvatska

Povezanost rada

Šumarstvo