Napredna pretraga

Pregled bibliografske jedinice broj: 305467

Examination and modelling of the influence of cutting parameters on the cutting force and the surface roughness in longitudinal turning


Bajić, Dražen; Lela, Branimir; Cukor, Goran
Examination and modelling of the influence of cutting parameters on the cutting force and the surface roughness in longitudinal turning // Strojniški vestnik - Journal of Mechanical Engineering, 54 (2008), 5; 322-333 (međunarodna recenzija, članak, znanstveni)


Naslov
Examination and modelling of the influence of cutting parameters on the cutting force and the surface roughness in longitudinal turning

Autori
Bajić, Dražen ; Lela, Branimir ; Cukor, Goran

Izvornik
Strojniški vestnik - Journal of Mechanical Engineering (0039-2480) 54 (2008), 5; 322-333

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Longitudinal turning; Cutting force; Surface roughness; Regression; Neural networks

Sažetak
This study examines the influence of three cutting parameters on the surface roughness and the cutting force components in longitudinal turning. The cutting speed, the feed rate and the depth of cut have been taken as influential factors. Two modelling methodology, namely regression analysis and neural networks, have been applied to experimentally determined data. Also, for both methodologies the ability of interpolation and extrapolation has been tested. Results obtained by neural network models have been compared to those obtained by regression models. Both methodologies give nearly similar results when interpolation is observed. However, regarding extrapolation neural network models give better results. In order to find the optimal values of the cutting parameters an optimization has been carried out.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
023-0692976-1742 - Istraživanje visokobrzinske obrade materijala (Dražen Bajić, )
069-0692976-1738 - Istraživanje visokoproduktivnih obrada na inteligentnim obradnim sustavima (Elso Kuljanić, )

Ustanove
Fakultet elektrotehnike, strojarstva i brodogradnje, Split,
Tehnički fakultet, Rijeka

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Uključenost u ostale bibliografske baze podataka:


  • Social Work Abstracts
  • SCI-Expanded