Stress Analysis of Constructive Orthotropic Ribbed Plate (CROSBI ID 527475)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Kulenović, Zlatan
engleski
Stress Analysis of Constructive Orthotropic Ribbed Plate
The plates strengthened with lot of ribs are very important design elements in mechanical engineering. In this work the stress analysis of thin ring-shaped plate with twelve one-sided radial ribs has been done. The plate is clamped along the inner edge and loaded with the uniformly distributed forces along the external edge. Since, there is no exact solution of this constructive orthotropic machine part, the analytical solution based on energy method are performed. The analytical results are compared with experimental results obtained by frozen stress method especial made model of araldite B. The curves of maximum radial and circular stresses in plate and ribs are comparatively drawn and analysed. The proposed analytical solution is shown a quality of an exact solution and it is suggested for the stress analysis of these constructions.
stress; constructive orthotropic; ribbed plate
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
15-16-x.
1999.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of 1st International Conference IRF 99 (Integrity, Reliability and Failure)
Meguid S.A., Silva Gomes J.F.
Porto: University of Porto, University of Toronto
0-7727-4802-0
Podaci o skupu
1st International Conference IRF 99 (Integrity, Reliability and Failure)
predavanje
19.07.1999-22.07.1999
Porto, Portugal