Napredna pretraga

Pregled bibliografske jedinice broj: 293899

Stress-Strain Analysis of Single-lap Tensile Loaded Adhesive Joints


Raos, Pero; Kozak, Dražan; Lucić, Mirjana
Stress-Strain Analysis of Single-lap Tensile Loaded Adhesive Joints // CP908, NUMIFORM '07, Materials, Processing and Design: Modeling, Simulation and Applications. / César de Sá, J.M.A. ; Santos, A.D. (ur.).
Porto: American Institute of Physics, 2007. str. 1093-1098 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Stress-Strain Analysis of Single-lap Tensile Loaded Adhesive Joints

Autori
Raos, Pero ; Kozak, Dražan ; Lucić, Mirjana

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
CP908, NUMIFORM '07, Materials, Processing and Design: Modeling, Simulation and Applications. / César de Sá, J.M.A. ; Santos, A.D. - Porto : American Institute of Physics, 2007, 1093-1098

ISBN
978-0-7354-0416-8

Skup
The 9th Int. Conference on Numerical Methods in Industrial Forming Processes NUMIFORM '07

Mjesto i datum
Porto, Portugal, 17.-21.06.2007

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Single-Lap Adhesive Joints; Tensile Loading; Experiment; Finite Element Analysis; Optimal Overlap Length

Sažetak
Both, experimental investigation and finite element analysis of single-lap adhesive joints subjected to tension have been done to find out an optimal overlap length. As the adherend material aluminum was considered with the two component high-strength engineering adhesive for the bonding of the layers. The thickness of the sheet metal layer was 1, 95 mm, while adhesive was 0, 15 mm thick. The width of all thin plates was 30 mm, but the overlap length varied as 15, 20, 30, 40 and 60 mm. Real mechanical properties of all materials in the joint have been determined experimentally. Obtained results proved that the overlap length affects directly the joint tensile strength, where an optimum value of overlap length can be defined. Finite element analysis of stress and strain fields could help to determine the moment when the crack failure spreads from overlap ends to the inside. In such a manner it could be better understand complex mechanisms of failure of adhesive joints.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
152-1201910-1909 - Analiza i procjena loma konstrukcija iz anizotropnih materijala (Dražan Kozak, )
152-1521473-1474 - Napredni postupci izravne izradbe polimernih proizvoda (Pero Raos, )
152-1521473-1476 - Suvremene tehnologije spajanja lakih strojarskih konstrukcija (Ivan Samardžić, )
152-1521473-3111 - Značajke proizvoda za sveukupnu realizaciju proizvoda kod brze proizvodnje (Milan Kljajin, )

Ustanove
Strojarski fakultet, Slavonski Brod