Napredna pretraga

Pregled bibliografske jedinice broj: 292215

The effect of a material's heterogeneity on the stress and strain distribution in the vicinity of a crack front


Kozak, Dražan; Gubeljak, Nenad; Vojvodič Tuma, Jelena
The effect of a material's heterogeneity on the stress and strain distribution in the vicinity of a crack front // Materials and technology, 41 (2007), 1; 41-46 (međunarodna recenzija, članak, znanstveni)


Naslov
The effect of a material's heterogeneity on the stress and strain distribution in the vicinity of a crack front

Autori
Kozak, Dražan ; Gubeljak, Nenad ; Vojvodič Tuma, Jelena

Izvornik
Materials and technology (1580-2949) 41 (2007), 1; 41-46

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Strength overmatched welded joint; crack; stress and strain distribution; finite element analysis

Sažetak
In this investigation a high strength low allowed steel (HSLA) of 700 MPa strength class was used as a base material. A butt welded joint with X grooves was produced with an overmatched weld metal that had a yield strength 23% greater than that of the base material. Three-point bending Bx2B test specimens (thickness B=36 mm) were extracted from the welded joints. The straight crack front (a0=35, 571 mm) crosses different microstructures through the thickness of the specimen. Both fracture mechanics tests and 3D finite- element analysis were performed. The CTOD parameter of the fracture toughness was measured and calculated numerically. The loading level at which stable crack growth occurred was also determined. The comparison of the experimental and numerical values of CTOD (d5) displacements showed good agreement. The principal stress, Sy, the Mises equivalent stress, Seq, and the plastic equivalent strain Epl, eq at the moment of crack initiation were studied for six equidistant layers from the surface to the mid-thickness of the specimen. Crack opening stress (denoted as Sx in this paper) in dependence on the local fracture toughness value was considered as the parameter which determines the direction of crack front propagation. The results show that the lower strength of the base metal contributes to the crack path deviation in the mid-thickness of the specimen. Both the crack path deviation and the higher toughness of the base metal increase the critical fracture toughness value of the welded joint.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
152-1201910-1909 - Analiza i procjena loma konstrukcija iz anizotropnih materijala (Dražan Kozak, )

Ustanove
Strojarski fakultet, Slavonski Brod

Autor s matičnim brojem:
Dražan Kozak, (190253)

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Uključenost u ostale bibliografske baze podataka:


  • Science Citation Index Expanded
  • JCR
  • Chemical Abstracts
  • DOAJ
  • Google Scholar
  • SCIRUS
  • METADEX
  • Inside Conferences
  • Engineered Materials Abstracts
  • Business Alert Abstracts (Steels
  • Nonferrous
  • Polymers
  • Ceramics
  • Composites)
  • Aluminium Industry Abstracts
  • Civil Engineering Abstracts
  • Ceramic Abstracts/World Ceramic Abstracts
  • Corrosion Abstracts
  • CSA
  • Referativnyj Žurnal: Metallurgija
  • COBIB