Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 289776

Extrusion Parameters Determination Based on Different Optimization Approaches


Jurković, Zoran; Jurković, Milan; Brezočnik, Miran; Buljan, Stipo
Extrusion Parameters Determination Based on Different Optimization Approaches // Journal for Technology of Plasticity, 31 (2006), 1-2; 79-89 (podatak o recenziji nije dostupan, članak, znanstveni)


CROSBI ID: 289776 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Extrusion Parameters Determination Based on Different Optimization Approaches

Autori
Jurković, Zoran ; Jurković, Milan ; Brezočnik, Miran ; Buljan, Stipo

Izvornik
Journal for Technology of Plasticity (0354-3870) 31 (2006), 1-2; 79-89

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Extrusion process; Optimization; Taguchi approach

Sažetak
Purpose of this research is determination of the optimal cold forward extrusion parameters with objective the minimization of tool load. This paper deals with the different optimization approaches relating to determine optimal values of logarithmic strain, die angle and coefficient of friction with the purpose to find minimal tool loading obtained by cold forward extrusion process. To achieve this, it has been carried out two experimental plans based on factorial design of experiment and orthogonal array. By using these plans it was performed classical optimization, according to response model of extrusion forming force, and the Taguchi approach, respectively. Experimental verification of optimal forming parameters with their influences on the forming forces was done. The experimental results showed an improvement in minimization of tool loading. It was compared results of optimal forming parameters obtained with different optimization approaches and based on that the analysis of the characteristics (features and limitations) of both techniques.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
0069021

Ustanove:
Tehnički fakultet, Rijeka

Profili:

Avatar Url Zoran Jurković (autor)

Avatar Url Milan Jurković (autor)

Citiraj ovu publikaciju

Jurković, Zoran; Jurković, Milan; Brezočnik, Miran; Buljan, Stipo
Extrusion Parameters Determination Based on Different Optimization Approaches // Journal for Technology of Plasticity, 31 (2006), 1-2; 79-89 (podatak o recenziji nije dostupan, članak, znanstveni)
Jurković, Z., Jurković, M., Brezočnik, M. & Buljan, S. (2006) Extrusion Parameters Determination Based on Different Optimization Approaches. Journal for Technology of Plasticity, 31 (1-2), 79-89.
@article{article, year = {2006}, pages = {79-89}, keywords = {Extrusion process, Optimization, Taguchi approach}, journal = {Journal for Technology of Plasticity}, volume = {31}, number = {1-2}, issn = {0354-3870}, title = {Extrusion Parameters Determination Based on Different Optimization Approaches}, keyword = {Extrusion process, Optimization, Taguchi approach} }
@article{article, year = {2006}, pages = {79-89}, keywords = {Extrusion process, Optimization, Taguchi approach}, journal = {Journal for Technology of Plasticity}, volume = {31}, number = {1-2}, issn = {0354-3870}, title = {Extrusion Parameters Determination Based on Different Optimization Approaches}, keyword = {Extrusion process, Optimization, Taguchi approach} }




Contrast
Increase Font
Decrease Font
Dyslexic Font