Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Measurement of ion elution from dental ceramics (CROSBI ID 128022)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Jakovac, Marko ; Živko-Babić, Jasenka ; Ćurković, Lidija ; Aurer, Andrej Measurement of ion elution from dental ceramics // Journal of the European Ceramic Society, 26 (2006), 9; 1695-1700-x

Podaci o odgovornosti

Jakovac, Marko ; Živko-Babić, Jasenka ; Ćurković, Lidija ; Aurer, Andrej

engleski

Measurement of ion elution from dental ceramics

Dental ceramics are generally considered to be chemically inert materials. However, characteristics of one dental ceramic are not necessarily present in another dental ceramic material. The aim of this study was to test the elution of sodium, potassium, magnesium, silicon and aluminium ions from feldspathic, alumina and glass-ceramics after 16 hours of immersion in the acetic acid solution, according to ISO Standard 6872 method. Elution was determined using the atomic absorption spectrophotometer (AAS) and UV/VIS spectrophotometer. The highest leaching of the ions was shown for the feldspathic ceramic specimens and the lowest for the glass ceramic specimens. The release of the ions from the analyzed specimens did not correspond to their composition declared by the manufacturers. It can be concluded that the measured release of ions is not significant and correlates well with the data from the literature linked with glass corrosion, that is, silicate-based dental ceramics.

chemical properties; Corrosion; glass ceramics; elution; dental materials

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

26 (9)

2006.

1695-1700-x

objavljeno

0955-2219

Povezanost rada

Kemijsko inženjerstvo, Dentalna medicina

Indeksiranost