Influence of process parameters in laser welding on the geometry of the welded joint (CROSBI ID 523144)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Kralj, Slobodan ; Bauer, Branko ; Ćurković, Lidija
engleski
Influence of process parameters in laser welding on the geometry of the welded joint
A report on the welding of heat-treatable steel 25 CrMo 4 and 42 CrMo 4, 2 mm thick sheet, with high power Nd:YAG laser is presented. Laser and process parameters were explored, applying model of central composite plan. Argon and helium were used as shielding gases. The testing was performed on the geometry of the welded joint. Results have been processed applying statistical methods and mathematical modeling using method of responding surfaces was done. Effects of focus position relative to the workpiece surface and gas flow rate upon the geometrical characteristics have been registered, while the effect of heat input is most significant. Linear and quadratic models of geometrical characteristics of the welded joint were obtained.
laser welding; steel; weld geometry; parameters
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
117-124.
2006.
objavljeno
Podaci o matičnoj publikaciji
16as Jordanas Tecnicas de Soldadura (EUROJOIN 6) : actas
Madrid:
Podaci o skupu
Jordanas Tecnicas de Soldadura (6 ; 2006)
pozvano predavanje
28.06.2006-30.06.2006
Santiago de Compostela, Španjolska