Napredna pretraga

Pregled bibliografske jedinice broj: 272248

Modeling And Simulation Of Tinplate Container Lids Stamping Process


Car, Zlatan; Barišić, Branimir; Math, Miljenko Dino
Modeling And Simulation Of Tinplate Container Lids Stamping Process // Trends in the Development of Machinery and Associated Technology / Ekinović, S. ; Vivancos, J. ; Yalcin, S. (ur.).
Barcelona-Lloret de Mar: Escola Tecnica Superior D Enginyeria Industrial de Barcelona ; Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istanbul, 2006. str. 173-176 (poster, nije recenziran, cjeloviti rad (in extenso), znanstveni)


Naslov
Modeling And Simulation Of Tinplate Container Lids Stamping Process

Autori
Car, Zlatan ; Barišić, Branimir ; Math, Miljenko Dino

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Trends in the Development of Machinery and Associated Technology / Ekinović, S. ; Vivancos, J. ; Yalcin, S. - Barcelona-Lloret de Mar : Escola Tecnica Superior D Enginyeria Industrial de Barcelona ; Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istanbul, 2006, 173-176

ISBN
995861730-7

Skup
10th International Research/Expert Conference - &#8220 ; Trends in the Development of Machinery and Associated Technology&#8221 ; - TMT 2006

Mjesto i datum
Barcelona - Lloret de Mar, Španjolska, 11. 09. - 15. 09. 2006

Vrsta sudjelovanja
Poster

Vrsta recenzije
Nije recenziran

Ključne riječi
Numerical modeling; Numerical simulation; Stamping process

Sažetak
This paper presents the use of numerical modeling, simulation and analysis in order to establish most appropriate tinplate container lids stamping process regarding strain energy. The numerical modeling, simulation and analysis were performed using Abaqus 6.4-1.software It is useful to perform the numerical simulation of the strain energy of production process on computer before expensive real manufacturing process. In this way, energy consumption in production can be made at the start stage of design, before tools and process parameters are set. In the paper for the numerical modeling, analysis, simulation and experimental investigations the material TS 275 (according to the European Standard EN 10202) [1] were used.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove
Tehnički fakultet, Rijeka,
Fakultet strojarstva i brodogradnje, Zagreb