Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 271672

The Effect of Fe on Corrosion Behaviour of the EN AW 8006 Alloy


Radošević, Jagoda; Gudić, Senka; Kliškić, Maja; Slavica, Sanja
The Effect of Fe on Corrosion Behaviour of the EN AW 8006 Alloy // Proceedings of the 4th Croatian Symposium on Electrochemistry / Gojo, Miroslav ; Mandić, Zoran (ur.).
Zagreb: Croatian Society of Chemical Engineers, 2006. str. 103-105 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 271672 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
The Effect of Fe on Corrosion Behaviour of the EN AW 8006 Alloy
(The effect of Fe on corrosion behaviour of the EN AW 8006 alloy)

Autori
Radošević, Jagoda ; Gudić, Senka ; Kliškić, Maja ; Slavica, Sanja

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 4th Croatian Symposium on Electrochemistry / Gojo, Miroslav ; Mandić, Zoran - Zagreb : Croatian Society of Chemical Engineers, 2006, 103-105

Skup
4th Croatian Symposium on Electrochemistry

Mjesto i datum
Primošten, Hrvatska, 28.05.-01.06.2006

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Domaća recenzija

Ključne riječi
Al-Fe alloy; Corrosion; Passivation; Thermal and mechanical treatment
(Al-Fe alloy; corrosion; passivation; thermal and mechanical treatment)

Sažetak
Electrochemical measurement techniques (potentiodynamic polarisation, cyclic voltammetry, electrochemical impedance spectroscopy) were used to examine the effect of Fe (in the range from 1.25 to 1.91 wt. %) on the corrosion behaviour of the Al-Fe alloy in a 0.5 M NaCl solution. The optimum Fe content in the alloy was 1.50 %. Namely, the alloy with 1.50 % Fe exhibited the highest corrosion resistance and the lowest corrosion current density. The active dissolving of this alloy was shifted towards more positive potentials, and the corrosion resistance in the active potential region was higher as well. Moreover, subsequent thermal and mechanical treatment of the alloy was shown to increase its stability, as well as the corrosion resistance in the passive and active potential region.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo



POVEZANOST RADA


Projekti:
0011001

Ustanove:
Kemijsko-tehnološki fakultet, Split


Citiraj ovu publikaciju:

Radošević, Jagoda; Gudić, Senka; Kliškić, Maja; Slavica, Sanja
The Effect of Fe on Corrosion Behaviour of the EN AW 8006 Alloy // Proceedings of the 4th Croatian Symposium on Electrochemistry / Gojo, Miroslav ; Mandić, Zoran (ur.).
Zagreb: Croatian Society of Chemical Engineers, 2006. str. 103-105 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)
Radošević, J., Gudić, S., Kliškić, M. & Slavica, S. (2006) The Effect of Fe on Corrosion Behaviour of the EN AW 8006 Alloy. U: Gojo, M. & Mandić, Z. (ur.)Proceedings of the 4th Croatian Symposium on Electrochemistry.
@article{article, year = {2006}, pages = {103-105}, keywords = {Al-Fe alloy, Corrosion, Passivation, Thermal and mechanical treatment}, title = {The Effect of Fe on Corrosion Behaviour of the EN AW 8006 Alloy}, keyword = {Al-Fe alloy, Corrosion, Passivation, Thermal and mechanical treatment}, publisher = {Croatian Society of Chemical Engineers}, publisherplace = {Primo\v{s}ten, Hrvatska} }
@article{article, year = {2006}, pages = {103-105}, keywords = {Al-Fe alloy, corrosion, passivation, thermal and mechanical treatment}, title = {The effect of Fe on corrosion behaviour of the EN AW 8006 alloy}, keyword = {Al-Fe alloy, corrosion, passivation, thermal and mechanical treatment}, publisher = {Croatian Society of Chemical Engineers}, publisherplace = {Primo\v{s}ten, Hrvatska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font