Napredna pretraga

Pregled bibliografske jedinice broj: 263618

The Influence of the Loading Rate on the Mechanical Properties of Drawing Steel Sheet


Buršak, Marian; Mamuzić, Ilija
The Influence of the Loading Rate on the Mechanical Properties of Drawing Steel Sheet // Metalurgija, 45 (2006), 1; 57-60 (podatak o recenziji nije dostupan, prethodno priopcenje, znanstveni)


Naslov
The Influence of the Loading Rate on the Mechanical Properties of Drawing Steel Sheet

Autori
Buršak, Marian ; Mamuzić, Ilija

Izvornik
Metalurgija (0543-5846) 45 (2006), 1; 57-60

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, prethodno priopcenje, znanstveni

Ključne riječi
Steel strip; drawing; tension; bending; strain rate

Sažetak
The paper analyzes the infl uence of the loading rate in the interval from 1 to 1000 mm/min on the mechanical properties of drawing steel sheet H260LAD with the gauge of 1 mm, used for the manufacture of automotive parts, under tension and bending conditions. It describes the aspects of material characteristics under tension and bending conditions, while bending tests were made on notched specimens (a modified impact bending test). The paper presents knowledge that using a modified notch toughness test it is possible to achieve the pressability (formability) characteristics corresponding to dynamic strain rates even under the static loading.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija



POVEZANOST RADA


Projekt / tema
0124001

Ustanove
Metalurški fakultet, Sisak

Autor s matičnim brojem:
Ilija Mamuzić, (27862)

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Uključenost u ostale bibliografske baze podataka:


  • Research Alert
  • Metals Abstracts
  • PaperChem
  • Metadex...