Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 263605

Optimisation of Laser Beam Cutting According to the Minimum Surface Roughness Criterion


Babić, Ivica; Cukor, Goran
Optimisation of Laser Beam Cutting According to the Minimum Surface Roughness Criterion // Engineering Review, 23 (2003), 13-20 (podatak o recenziji nije dostupan, članak, stručni)


CROSBI ID: 263605 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Optimisation of Laser Beam Cutting According to the Minimum Surface Roughness Criterion

Autori
Babić, Ivica ; Cukor, Goran

Izvornik
Engineering Review (1330-9587) 23 (2003); 13-20

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, stručni

Ključne riječi
Laser beam cutting; Surface roughness; Optimisation

Sažetak
In this paper the optimisation of cutting QStE 380N steel with the gas CO2 laser according the minimum surface roughness criterion has been treated. First, the influence variables were chosen. The experiments were done according to shortened design on account of simplicity and rationality. Experimental data were treated with multiple regression analysis to establish the mathematical model which describes the dependency of the surface roughness on the elements of laser beam cutting regime (namely cutting speed and cutting gas pressure) and the trace measuring distance from the upper surface of the sheet metal. The adequacy of the developed model was checked in accordance to Fischer's criterion. Finally, the optimal cutting speed and the optimal cutting gas pressure for which the surface roughness has the least amount according to DIN 2310 standard were determined.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
0069020

Ustanove:
Tehnički fakultet, Rijeka

Profili:

Avatar Url Goran Cukor (autor)

Citiraj ovu publikaciju

Babić, Ivica; Cukor, Goran
Optimisation of Laser Beam Cutting According to the Minimum Surface Roughness Criterion // Engineering Review, 23 (2003), 13-20 (podatak o recenziji nije dostupan, članak, stručni)
Babić, I. & Cukor, G. (2003) Optimisation of Laser Beam Cutting According to the Minimum Surface Roughness Criterion. Engineering Review, 23, 13-20.
@article{article, year = {2003}, pages = {13-20}, keywords = {Laser beam cutting, Surface roughness, Optimisation}, journal = {Engineering Review}, volume = {23}, issn = {1330-9587}, title = {Optimisation of Laser Beam Cutting According to the Minimum Surface Roughness Criterion}, keyword = {Laser beam cutting, Surface roughness, Optimisation} }

Uključenost u ostale bibliografske baze podataka:


  • Cambridge Scientific Abstract (CSA)





Contrast
Increase Font
Decrease Font
Dyslexic Font