Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 263514

Influence of feed speed on emission of fine sawdust during circular sawing


Beljo Lučić, Ružica; Čavlović, Ankica; Đukić, Igor; Ivančan, Željko
Influence of feed speed on emission of fine sawdust during circular sawing // V. Medzinárodna vedecká konferencia Trieskové a beztrieskové obrabanie drevá 2006 : sborník / Dzurenda, Ladislav ; Banski Adrián (ur.).
Zvolen: Technická univerzita, 2006. str. 49-55 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 263514 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Influence of feed speed on emission of fine sawdust during circular sawing

Autori
Beljo Lučić, Ružica ; Čavlović, Ankica ; Đukić, Igor ; Ivančan, Željko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
V. Medzinárodna vedecká konferencia Trieskové a beztrieskové obrabanie drevá 2006 : sborník / Dzurenda, Ladislav ; Banski Adrián - Zvolen : Technická univerzita, 2006, 49-55

ISBN
80-228-1674-4

Skup
Medzinárodna vedecká konferencia Trieskové a beztrieskové obrabanie drevá (5 ; 2006)

Mjesto i datum
Starý Smokovec, Slovačka, 12.-14.10.2006

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
sawdust; fir-wood; oak-wood; particleboard; particle size distribution

Sažetak
This paper presents granulometric analysis of sawdust generated in processing oak-wood, fir-wood and particleboard with circular saw at three different feed speeds and two working table position. Woodworking machines and cutting parameters, as well as processed material properties determine the particle size distribution of chipped wood and as a result also the emission of airborne wood particles at the workplace. The objective of this paper was to clarify the influence of feed speed, cutting angle and wood material characteristics on particle size distribution of sawdust generated during sawing of solid fir-wood (Abies Alba Mill.), oak-wood (Quercus Robur L.) and laminated particleboard with circular saw. Generally, the results showed that the share of small particles in sawdust decreases with the increase of feed speed. Working table position and cutting angle have very important influence on particle size distribution of sawdust when cutting solid wood.

Izvorni jezik
Engleski

Znanstvena područja
Šumarstvo



POVEZANOST RADA


Projekti:
0068139

Ustanove:
Šumarski fakultet, Zagreb

Citiraj ovu publikaciju

Beljo Lučić, Ružica; Čavlović, Ankica; Đukić, Igor; Ivančan, Željko
Influence of feed speed on emission of fine sawdust during circular sawing // V. Medzinárodna vedecká konferencia Trieskové a beztrieskové obrabanie drevá 2006 : sborník / Dzurenda, Ladislav ; Banski Adrián (ur.).
Zvolen: Technická univerzita, 2006. str. 49-55 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Beljo Lučić, R., Čavlović, A., Đukić, I. & Ivančan, Ž. (2006) Influence of feed speed on emission of fine sawdust during circular sawing. U: Dzurenda, L. & Banski Adrián (ur.)V. Medzinárodna vedecká konferencia Trieskové a beztrieskové obrabanie drevá 2006 : sborník.
@article{article, editor = {Dzurenda, L. and Banski Adri\'{a}n}, year = {2006}, pages = {49-55}, keywords = {sawdust, fir-wood, oak-wood, particleboard, particle size distribution}, isbn = {80-228-1674-4}, title = {Influence of feed speed on emission of fine sawdust during circular sawing}, keyword = {sawdust, fir-wood, oak-wood, particleboard, particle size distribution}, publisher = {Technick\'{a} univerzita}, publisherplace = {Star\'{y} Smokovec, Slova\v{c}ka} }




Contrast
Increase Font
Decrease Font
Dyslexic Font