Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Machining of Hard Non : Metal Materials (CROSBI ID 520676)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Ciglar, Damir ; Udiljak, Toma ; Škorić, Stephan ; Markan, Ivica Machining of Hard Non : Metal Materials // 10th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" (TMT 2006) : proceedings / Ekinović, Sabahudin ; Yalcin, Senad ; Vivancos Calver, Joan (ur.). Barcelona, 2006. str. 1223 - 1226-x

Podaci o odgovornosti

Ciglar, Damir ; Udiljak, Toma ; Škorić, Stephan ; Markan, Ivica

engleski

Machining of Hard Non : Metal Materials

Plastic deformation and chip formation machanisms form the basis of material removal processes and according to that all materials can be separated into two groups. The first group encompasses materials with plastic properties (metals, plastic materials, composites, etc.) and the second group consists of hard and brittle materials, i.e. materials with low plasticity (glass, ceramics, stone, etc.). Due to their low plasticity, machining of brittle materials has some specific characteristics. Considering that data on the machining of these materials can be rarely found in literature, this paper gives some investigation results in the machining of glass as a representative of hard and brittle materials. Glass is primarily a decorative material and its purpose depends on the visual effect of machined surface. A comparison of the surface quality obtained by different material removal processes is presented using the example of glass machining. The paper also presents the investigation of the influence of cutting parameters (cutting speed and feedrate) on surface quality in final machining phase, i.e. the polishing of glass.

glass; surface roughness; polishing

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

1223 - 1226-x.

2006.

objavljeno

Podaci o matičnoj publikaciji

10th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" (TMT 2006) : proceedings

Ekinović, Sabahudin ; Yalcin, Senad ; Vivancos Calver, Joan

Barcelona:

Podaci o skupu

International Research/Expert Conference Trends in the Development of Machinery and Associated Technology (10 ; 2006)

poster

11.09.2006-15.09.2006

Lloret de Mar, Španjolska; Barcelona, Španjolska

Povezanost rada

Strojarstvo