BENDING PROPERTIES OF ALUMINIUM FOAM PROFILES (CROSBI ID 519877)
Neobjavljeno sudjelovanje sa skupa | neobjavljeni prilog sa skupa | međunarodna recenzija
Podaci o odgovornosti
Filetin, Tomislav ; Marić, Gojko ; Alar, Željko
engleski
BENDING PROPERTIES OF ALUMINIUM FOAM PROFILES
It is well known that metal foams are porous, cellular materials with very nonuniform structure. In fact, that structure significantly affects metal foams mechanical properties. Main goal of this paper was testing of bending properties of the various profiles made from aluminium foam with closed cells. During the testing next parameters were varied: shape of the profile and foam density. The different forms of cross section profile have been produced with PM Alulight process. The three point bending test was used for investigation. With this testing were obtained bending characteristics - load at failure, maximum deflection, moment of section, that also depend on shape of the profile and foam density.
aluminium foams; bending properties; structural shapes
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
nije evidentirano
nije evidentirano
Podaci o skupu
International conference on materials, energy and design
poster
14.03.2006-17.03.2006
Dublin, Irska