Testing of Elastomeric Bearings for Bridges (CROSBI ID 519468)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Rak, Mladenko ; Krolo, Joško ; Damjanović, Domagoj
engleski
Testing of Elastomeric Bearings for Bridges
The aim of these testings was to determine mechanical characteristics of elastomeric bearings for new Jankomir bridge over Sava river in Zagreb with emphasis on the characteristics in horizontal direction under vertical load. Tested bearings were roun shaped with diameter of 450 mm and total height of 111 mm type V2ES 2400/190 (thickness of elastomeric layers is 5x11=55 mm, and thickness of steel plates is 4x4+2x20=56 mm ). The manufacturer of these bearings is Polirol Zagreb. Testing was carried out in accordance with european norm prEN 1998-2: ''Bridges with seismic isolation''. Testing were carried out in the Structure testing laboratory of Civil engineering Faculty, University of Zagreb
bridge; bearing; mechanical properties; displacement; stiffness; damping; shear modulus
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
105-106-x.
2006.
objavljeno
Podaci o matičnoj publikaciji
23rd DANUBIA-ADRIA Symposium on Experimental Methods in Solid Mechanics
Alena Torkova, Maria Chalupova
Pribylina-Podbanské : Žilina: EDIS, Editing Centre, University of Žilina, Slovak Republic
Podaci o skupu
23rd DANUBIA-ADRIA SYMPOSIUM on experimental methods in solid mechanics
predavanje
26.09.2006-29.09.2006
Podbanské, Slovačka; Žilina, Slovačka