Napredna pretraga

Pregled bibliografske jedinice broj: 254464

Utilization of GA for Optimization of Tool Path on a 2D Surface


Car, Zlatan; Mikac, Tonči; Veža, Ivica
Utilization of GA for Optimization of Tool Path on a 2D Surface // Proceedings of the 6th International Workshop on Emergent Synthesis / Ueda, Kanji (ur.).
Tokyo: The University of Tokyo, 2006. str. 231-236 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Utilization of GA for Optimization of Tool Path on a 2D Surface

Autori
Car, Zlatan ; Mikac, Tonči ; Veža, Ivica

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 6th International Workshop on Emergent Synthesis / Ueda, Kanji - Tokyo : The University of Tokyo, 2006, 231-236

Skup
6th International Workshop on Emergent Synthesis

Mjesto i datum
Tokio, Japan, 18-19.08.2006.

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Genetic algorithm; machining center; 2D surface

Sažetak
Machining centers based on the milling principles are becoming more and more popular due to their ability to handle geometrically complex workpieces. Unfortunately, several physical phenomena that often affect the quality of the desired surface. The most common problem is definition of the tool-path movements which have strong influence on the kinematics and dynamics of the machining centers. To solve this problem we have proposed utilization of the GA based mostly on the geometrical parameters. From the obtain results we could conclude that here presented method is promising and future development is necessary, especially for introduction more complex technological parameters.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
0023005

Ustanove
Tehnički fakultet, Rijeka