Utilization of GA for Optimization of Tool Path on a 2D Surface (CROSBI ID 518560)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Car, Zlatan ; Mikac, Tonči ; Veža, Ivica
engleski
Utilization of GA for Optimization of Tool Path on a 2D Surface
Machining centers based on the milling principles are becoming more and more popular due to their ability to handle geometrically complex workpieces. Unfortunately, several physical phenomena that often affect the quality of the desired surface. The most common problem is definition of the tool-path movements which have strong influence on the kinematics and dynamics of the machining centers. To solve this problem we have proposed utilization of the GA based mostly on the geometrical parameters. From the obtain results we could conclude that here presented method is promising and future development is necessary, especially for introduction more complex technological parameters.
Genetic algorithm; machining center; 2D surface
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
231-236-x.
2006.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 6th International Workshop on Emergent Synthesis
Ueda, Kanji
Tokyo: University of Tokyo Press
Podaci o skupu
6th International Workshop on Emergent Synthesis
predavanje
18.08.2006-19.08.2006
Tokyo, Japan