Mathematical modelling of surface roughness in turning process (CROSBI ID 518227)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Bajić, Dražen ; Špar, Ivan ; Veža, Ivica
engleski
Mathematical modelling of surface roughness in turning process
The roughness of technical surfaces presents one of the most important criterions relating to the choice of machining process and cutting parameters in project processing. The article focuses on researching results of the roughness of treated surface depending on the cutting parameters characterized to the longitudinal turning process. In order to find the most suitable empiric model to describe the depending character of the roughness of treated surface the following elements have been taken into consideration: a circumferential component of the cutting speed, the depth of cut and a feed. The experiment with the steel 34CrNiMo6 (DIN) has been conducted and the central composite design of the second degree has been applied. Given results determined by regression analysis led to the empiric equation that is used for the purpose of the calculation of the average arithmetic roughness.
longitudinal turning; surface roughness; cutting parameters
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
113-118-x.
2006.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 5th DAAAM International Conference on Advanced Technologies for Developing Countries, ATDC 06
Mikac, Tonči ; Katalinić, Branko
Rijeka: Tehnički fakultet Sveučilišta u Rijeci ; DAAAM International Vienna
Podaci o skupu
Advanced Technologies for Developing Countries, ATDC 06
predavanje
28.06.2006-30.06.2006
Rijeka, Hrvatska