Napredna pretraga

Pregled bibliografske jedinice broj: 251692

Bending


Math, Miljenko; Grizelj, Branko; Grizelj, Dejan; Popović, Robert; Jukić, Irena; Marijić, Mario; Martić, Marina; Seuček, Ivan; Šoškić, Nikola
Bending // Zbornik radova of the International Scientific Conference on Production Engineering / Cebalo, Roko ; Kopač, Janez ; Ciglar, Damir (ur.).
Zagreb: Croatian Association of Production Engineering, 2006. str. 89-99 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Bending

Autori
Math, Miljenko ; Grizelj, Branko ; Grizelj, Dejan ; Popović, Robert ; Jukić, Irena ; Marijić, Mario ; Martić, Marina ; Seuček, Ivan ; Šoškić, Nikola

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Zbornik radova of the International Scientific Conference on Production Engineering / Cebalo, Roko ; Kopač, Janez ; Ciglar, Damir - Zagreb : Croatian Association of Production Engineering, 2006, 89-99

ISBN
953-97181-7-1

Skup
International Scientific Conference on Production Engineering

Mjesto i datum
Lumbarda, Hrvatska, 28.06.-01.07.2006.

Vrsta sudjelovanja
Pozvano predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Plate bending; FEM; plate force

Sažetak
The paper is concerned with the numeric procedure in plate bending. For numeric procedure the finite element method is used. Calibration force is determined when bending force and calibration coefficient are known. The calibration coefficient is determined by experiment. These factors are: material of the circular plate, bending radius circular plate, diameter of the circular plate, thickness of the circular plate and method of loading of the circular plate. The analysis of bending plate is limited to the facts and figures used so far in the fabrication of spherical tanks, ie for deformations up to 1 %.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
0152012

Ustanove
Strojarski fakultet, Slavonski Brod