Effects of Gear Teeth Support upon Tooth-Root Stress Longitudinal Distribution (CROSBI ID 517564)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Marunić, Gordana
engleski
Effects of Gear Teeth Support upon Tooth-Root Stress Longitudinal Distribution
The paper deals with the three-dimensional FEM stress analysis of spur thin-rimmed gears with different blank structures. The tooth-root longitudinal stress distribution has been established of thin-rimmed gear without and with web, and for the sake of comparison, of a solid gear. The tooth-root stresses have been separated and analysed for the engagement position at the outer point of single pair tooth contact. In the case of thin-rimmed gear with web, two gear blank structures have been considered: middle and end web position. The correlation between the effects of a tooth support rigidity determined by the chosen gear blank structure and the tooth-root stress have been presented. The stress results have been shown as a function of thin rim thickness and related to the stress values of a solid gear. The obtained conclusions about tooth-root stress behavior offer some useful information for the buildup of gear.
tooth-root stress; thin-rimmed gear; web position; spur gear blank
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
393-400-x.
2006.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 6^th International Symposium on Tools and Methods of Competitive Engineering -TMCE 2006
Horvath, Imre ; Duhovnik, Jože
Delft : Ljubljana: Delft University of Technology, University of Ljubljana
Podaci o skupu
Sixth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2006
predavanje
18.04.2006-22.04.2006
Ljubljana, Slovenija