Adaptive Tool Path Planning Applied in Manufacturing Optimization (CROSBI ID 516932)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Radej, Joško ; Budin, Leo ; Mihajlović, Željka
engleski
Adaptive Tool Path Planning Applied in Manufacturing Optimization
Paper describes research done on algorithms for the generation of gouge free nonisoparametric tool paths across surface plane segments obtained through triangulation partitioning. Along with contiguous trajectory sequences, adaptive tool path planning introduces partially discontinuous tool trajectories. Algorithm achieves the necessary trajectory continuity by the insertion of the auxiliary tool orientation trajectories. The tool passes over the path gaps are accomplished through rapid tool traverses. The evaluation of surface machining optimization is provided by simulation of computed tool motion trajectories applied to triangulation models. Tool tracks and tool trajectories obtained with different surface models are used for presentation and examination of the optimized tool path modeling and algorithm computing performance issues.
tool path planning; manufacturing optimization
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
323-326-x.
2004.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 12th IEEE Mediterranean Electrotechnical Conference, MELECON 2004
Matijasevic, M. ; Pejcinovic, B. ; Tomsic, Z . ; Butkovic, Z. (ur.)
Zagreb:
Podaci o skupu
IEEE Mediterranean Electrotechnical Conference, MELECON 2004
predavanje
12.05.2004-15.05.2004
Dubrovnik, Hrvatska