Napredna pretraga

Pregled bibliografske jedinice broj: 245376

Multi-objective Design and Adaptable Reconfiguration of the Manufacturing System Shop-floor


Car, Zlatan; Hatono, Itsuo; Ueda, Kanji
Multi-objective Design and Adaptable Reconfiguration of the Manufacturing System Shop-floor // Progres in Virtual Manufacturing Systems, Proceedings of The 36th CIRP International Seminar on Manufacturing Systems / Prof. Dr.-Ing. Helmut Bley (ur.).
Saarbrucken: Published by CIRP ISMS, 2003. str. 493-500 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Multi-objective Design and Adaptable Reconfiguration of the Manufacturing System Shop-floor

Autori
Car, Zlatan ; Hatono, Itsuo ; Ueda, Kanji

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Progres in Virtual Manufacturing Systems, Proceedings of The 36th CIRP International Seminar on Manufacturing Systems / Prof. Dr.-Ing. Helmut Bley - Saarbrucken : Published by CIRP ISMS, 2003, 493-500

Skup
36th CIRP International Seminar on Manufacturing Systems

Mjesto i datum
Saarbrucken, Njemačka, 03-05.06.2003.

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Emergent Synthesis; Layered BMS; multi-objective design and reconfiguration

Sažetak
This paper presents a new approach for multi-objective design and reconfiguration of the current manufacturing system. A proposed model for multi-objective design and adaptable reconfiguration is based on the Emergent Synthesis concept. Emergent Synthesis is introduced in the adaptable reconfiguration within implementation of the layered based architecture and utilizing the concept of the Biological Manufacturing System. Based on the proposed approach a simulation model has been built and evaluated. Two types of simulation analyses have been preformed for evaluation of the simulation model. The first analysis has been conducted using randomly generated input data. For the purpose of this analysis it was simulated production in the shop-floor of the manufacturing system with the two different initial configurations. For the second analysis, case studies were performed using realistic data ; it was simulated production of the cellular phone devices, and production of the manufacturing mechanical parts (classical machine tool production). From obtained results of the simulation it can be conclude that a proposed model has a high level of multi-objective adaptation of the manufacturing system shop-floor.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti



POVEZANOST RADA


Ustanove
Tehnički fakultet, Rijeka

Autor s matičnim brojem:
Zlatan Car, (259465)