Computer Simulation of Hollow Tinplate Part Manufacturing (CROSBI ID 516660)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Barišić, Branimir ; Car, Zlatan ; Mikac, Tonči, Ikonić, Milan
engleski
Computer Simulation of Hollow Tinplate Part Manufacturing
In order to predict the process parameters for the manufacturing of the hollow tinplate lids the computer simulation of the forming process was done. Needs for the exact present of process are higher with the development of modern and intelligent manufacturing systems. The simulation enables real process to substitute for numerical model so the procedure of analysis and examining could be faster and cheaper than on the manufacturing process. The FEM analysis applying ABAQUS 6.4. code as well as experimental analysis have been used in order to predict the influences of wall thickness and lubrication on process parameters and estimate their influence on reduction process force and energy. The accuracy of the numerical results is confirmed through the comparison with the experimental ones.
Computer simulation; FEM analysis; Tinplate
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
16-20-x.
2005.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of 6th International Scientific-Technical Conference Automation and CA Systems in Technology Planning and in Manufacturing
Novak-Marcincin, Josef
Herl'any: TU Košice
Podaci o skupu
6th International Scientific-Technical Conference "Automation and CA Systems in Technology Planning and in Manufacturing"
predavanje
02.05.2005-04.05.2005
Herľany, Slovačka