Napredna pretraga

Pregled bibliografske jedinice broj: 236942

Possibility of tribological loss reduction by applying welded layers to the working parts of worm-presses in oil mills


Marušić, Vlatko; Kljajin, Milan; Penava, Andrijana
Possibility of tribological loss reduction by applying welded layers to the working parts of worm-presses in oil mills // Tehnički vjesnik/Technical Gazette, 12 (2005), 3/4; 11-16 (podatak o recenziji nije dostupan, prethodno priopcenje, znanstveni)


Naslov
Possibility of tribological loss reduction by applying welded layers to the working parts of worm-presses in oil mills

Autori
Marušić, Vlatko ; Kljajin, Milan ; Penava, Andrijana

Izvornik
Tehnički vjesnik/Technical Gazette (1330-3651) 12 (2005), 3/4; 11-16

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, prethodno priopcenje, znanstveni

Ključne riječi
Oil mill; tribological losses; worm-presses; protective layers

Sažetak
The paper analyzes protective layers on the working parts of worm-presses of different producers, i.e. original foreign and domestic substitution parts. Chemical structure examinations, metallographic structure tests, wear effect recordings and hardness measurements have been carried out. The wear resistance of our own welded layers has been experimentally examined on extraction cage knives and the results have been compared with classically carburised knives used in oil mills. It has been found that the wear resistance of the deposited welded layers does not depend on surface hardness only but much more on micro-hardness and distribution of carbides in as tough a matrix as possible.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
0152015
0152016

Ustanove
Strojarski fakultet, Slavonski Brod

Časopis indeksira:


  • Scopus


Uključenost u ostale bibliografske baze podataka:


  • The INSPEC Science Abstracts series
  • Geo Abstracts
  • CSA
  • EMBASE
  • Elsevier Biobase
  • Elsevier GeoAbstracts
  • Ei-Compendex
  • PaerChem